Business

Raising Prices Without Losing Customers

K By Kev 9 November 2026 8 min read
Share
Business guide

Raising prices is the decision most shopkeepers put off longest and lose the most money to. When a supplier’s cost goes up, absorbing it feels like protecting the customer, and for a week it is. Over a quarter it is simply running the shop for less, and because the loss is spread across every sale it never announces itself. The two things that make a price rise survivable are getting the arithmetic right, which most people do not, and choosing which lines to move, which most people do not think about at all.

Quick answer

Adding the shilling increase onto your price loses margin. To hold a 20% margin when cost goes from KES 100 to 110, divide the new cost by 0.8: the price must move from 125 to 137.50, not to 135.

Key takeaways
  • Divide, do not add. New price = new cost / (1 - target margin). Passing a KES 10 cost rise on as KES 10 loses margin.
  • Markup is on cost and margin is on price. Using them interchangeably is how shops reprice themselves into trouble a few percent at a time.
  • Customers can quote the price of staples and could not price most of your shop. Recover margin where attention is not falling.
  • One considered change is noticed once; four small ones are noticed four times and look like drift.
On this page▾
  1. The arithmetic almost everyone gets wrong
  2. Repricing properly
  3. Where repricing goes wrong
  4. A worked example: a duka facing a cooking oil increase
  5. Knowing the margin before you move the price
  6. Frequently asked questions

The arithmetic almost everyone gets wrong

The common move when a cost rises by KES 10 is to add KES 10 to the selling price. That protects the shilling amount of profit and quietly loses the margin, and on a shop with thin margins that is the difference between covering costs and not.

Work it from the margin you need rather than from the size of the increase. If an item costs KES 100 and you sell at 125, your margin is 20% of the selling price, not 25%. When cost rises to 110, holding 20% means the new price is 110 divided by 0.8, which is KES 137.50. Adding the KES 10 straight onto the price gives 135, and a margin of 18.5%.

This is why the markup-versus-margin distinction is not pedantry. A 25% markup on cost and a 25% margin on price are different numbers, and shops that use them interchangeably reprice themselves into trouble a few percent at a time.

Want to see it running in your own business first?

Sign Up

Repricing properly

Do this as a deliberate exercise when costs move, not item by item as invoices arrive.

  1. 1

    Step 1: Know your current margin per line, not overall

    An overall margin hides the lines that are already underwater. Before changing anything, list your main items with cost, price and the resulting margin. The surprises in that list are usually worth more than the repricing.

  2. 2

    Step 2: Divide, do not add

    New price = new cost divided by (1 minus your target margin). Cost 110 at a 20% target is 110 / 0.8 = 137.50. Writing this formula on the wall behind the counter saves more money than any negotiation.

  3. 3

    Step 3: Sort lines into three groups

    Price-visible items that customers know to the shilling, such as staples and sodas. Price-invisible items they could not quote if asked. And items where you are the only nearby stockist. The three groups get different treatment and moving them all equally is the mistake.

  4. 4

    Step 4: Move the invisible lines fully, the visible ones carefully

    Customers notice a bread price and do not notice a shoe-polish price. Recovering more margin on the invisible lines lets you move the visible ones later, smaller, or not at all. This is not deception; it is where attention actually falls.

  5. 5

    Step 5: Change the label the same day

    The worst outcome is a new cost, an old shelf label and a staff member honouring the old price. Decide, print, and change the labels in one pass, and tell whoever is on the counter what moved.

Where repricing goes wrong

Absorbing the increase to be kind

It is the most common response and the most expensive. You cannot subsidise a supplier’s price rise out of a thin margin for long, and customers rarely notice that you did.

Adding the increase to the price instead of dividing

Passing on a KES 10 cost rise as KES 10 on the price leaves you with less margin than before, because the margin is a share of a price that barely moved. The gap is small per item and large per quarter.

Moving every line by the same percentage

A uniform rise is maximally visible for the amount of margin it recovers. Differentiating by how price-visible the line is recovers the same money with less customer friction.

Repricing in dribs and drabs

Four small increases across a quarter are noticed four times. One considered change is noticed once, and is easier to explain.

Not telling staff

Counter staff asked about a price rise they did not know was coming will either apologise for it or quietly give the old price. Both cost you. A one-line heads-up is enough.

A worked example: a duka facing a cooking oil increase

Worked example

A duka buys a 2-litre cooking oil at KES 560 and sells at 700, a margin of 20% of the selling price. The distributor raises the cost to KES 616, which is a 10% increase.

The instinctive response is to pass on the KES 56: 700 becomes 756. At a cost of 616, a price of 756 is a margin of 18.5%, not 20%. Holding 20% needs 616 / 0.8 = KES 770. The KES 14 gap per bottle is invisible in any single sale and is roughly KES 4,200 a month on 300 bottles.

The gap widens when the rise is only partly passed on. Suppose the owner feels able to move the price to 740, because cooking oil is a price-visible staple. The margin at 616 cost and 740 price is 16.8% rather than 20%, which is KES 30 a bottle short of the 770 the target needed, or about KES 9,000 a month on 300 bottles.

The practical answer is step 3. Oil moves to 740 and takes the margin hit, because customers do know its price. Shoe polish, batteries and matches, which nobody could quote, move to full target margin and recover most of the difference. Total margin holds; the one price customers check moved least.

Business impact

Running a shop on memory and paper leaves money on the table: missed sales, stock you cannot account for, and receipts KRA will not accept.

Veira records every sale, tracks stock and keeps you eTIMS-compliant automatically, so the numbers look after themselves.

Free tools for this

Knowing the margin before you move the price

Step 1 is the blocker for most shops: you cannot reprice to a target margin if you do not know the current one per line. Veira holds cost and selling price against each product, so the margin is a column rather than an evening with a calculator.

When prices do change, recording the change means later reports compare like with like, which is how you find out a month afterwards whether the rise cost you volume. Without that, the only evidence is an impression.

The judgement in step 3 is yours and stays yours. Which of your lines customers can quote from memory is knowledge about your street, and no system has it.

Frequently asked questions

How do I calculate a new price after a cost increase?
Divide the new cost by one minus your target margin. A cost of KES 110 at a 20% target margin gives 110 / 0.8 = KES 137.50. Adding the shilling increase onto the old price gives 135 and a margin of 18.5%, which is the common error.
What is the difference between markup and margin?
Markup is calculated on cost; margin is calculated on the selling price. A 25% markup on KES 100 gives a price of 125 and a margin of 20%. Using them interchangeably is how shops reprice themselves into trouble a few percent at a time.
Should I raise all prices at once or gradually?
One considered change beats several small ones. Four increases in a quarter get noticed four times and look like drift; a single change is noticed once and can be explained. Review deliberately when costs move rather than reacting invoice by invoice.
Which prices do customers actually notice?
Staples and frequently bought items, which people can usually quote to the shilling. Most of the rest of the shop they could not price if asked. Recovering margin where attention is not falling is both easier and less damaging to the relationship.
Should I tell customers when prices go up?
For visible staples, a short honest note is better than silence, because the alternative is a customer discovering it at the till and feeling misled. For the rest of the shop, changing the label is sufficient.
What if a competitor has not raised their price?
Check whether they have absorbed it or simply have older stock bought at the old cost, which is usually the answer and is temporary. Matching a price that is losing them money is not a strategy, though it may be worth holding one visible line while recovering elsewhere.
How often should I review prices?
Whenever a supplier cost changes materially, and as a routine at least quarterly. A price list that has not been looked at in a year is almost certainly wrong in both directions, with some lines underwater and others leaving money behind.

A price rise handled badly costs customers; a price rise avoided costs margin on every sale until something gives. Work from the margin you need, divide rather than add, and move the lines nobody can quote before the ones everybody can. See how Veira tracks cost and margin per product if step one is where you get stuck.

Need help, or want to talk it through first? Chat with us on WhatsApp
Terms explained

Keep reading

See all Business guides

Veira for your business

On the Veira side of this: what Veira costs, by plan.

Browse Veira by business type · Who we serve