Business

How to Do a Stocktake Without Closing the Shop

K By Kev 10 November 2026 9 min read
Share
Business guide

The reason most shops count stock once a year, badly, is that the annual full count is genuinely horrible: a Sunday, the shutters down, everybody tired, and a number at the end that nobody fully trusts. The alternative is not a better annual count. It is to stop doing annual counts and start counting one section at a time while the shop is open, which takes less total effort, produces a figure you believe, and tells you something you can still act on.

Quick answer

Count in sections rather than all at once. Pick one shelf or category a week, count it against what the records say should be there, and write down the difference. A shop that counts a section weekly knows its true stock position permanently; a shop that counts everything in January knows it for about a fortnight.

Key takeaways
  • A stocktake is a comparison, not a list. Counting without an expected figure produces a number and no information.
  • Count one section a week rather than everything once a year. The whole shop is covered each quarter and no day is a counting day.
  • Count blind, then compare. Reading the expected number first makes you see it on the shelf.
  • Write the reason beside every adjustment. The accumulated reasons are the report; the quantities are just arithmetic.
On this page▾
  1. What a stocktake is actually for
  2. Counting in sections
  3. Why stocktakes go wrong
  4. A worked example: a general shop in Nakuru
  5. Where the expected number comes from
  6. Frequently asked questions

What a stocktake is actually for

A stocktake is not an inventory list. It is a comparison. The useful output is not "we have 43 cartons of milk"; it is "we have 43 and the records said 51, so eight have gone and we need to know how". Counting without something to count against produces a number and no information.

That comparison is where the money is. The gap between what should be on the shelf and what is on the shelf is theft, spoilage, breakage, mis-keyed sales, deliveries short-counted at the gate, and items sold at the wrong price. Each has a different fix, and you cannot pick the fix without first seeing the gap.

This is also why the annual count is weak. By the time you find a gap twelve months wide, the trail is cold: you cannot tell which month it happened in, which member of staff was on, or which supplier short-delivered. A gap found in one section this week is traceable.

Want to see it running in your own business first?

Sign Up

Counting in sections

Divide the shop into roughly as many sections as there are weeks in a quarter. Each week, one section gets counted. The whole shop is covered every quarter and no day is ever a counting day.

  1. 1

    Step 1: Draw the sections on paper first

    Walk the shop and write down the sections: the drinks fridge, the dry goods shelf, the cleaning aisle, behind the counter, the store room. Number them. Fifteen to twenty sections is normal for a duka and gives you a full cycle each quarter.

  2. 2

    Step 2: Count at a quiet hour, not after closing

    Mid-morning on the slowest weekday beats 9pm after a full shift. Counting tired is where most errors come from, and a count with errors in it is worse than no count because you will chase differences that are not real.

  3. 3

    Step 3: Count what is there, then look at the record

    This order matters. If you read the expected number first you will see it on the shelf, which is a well-documented habit of the human eye and not a character flaw. Count blind, write it down, then compare.

  4. 4

    Step 4: Investigate only the differences worth the time

    Rank the gaps by shilling value, not by count. Two missing cartons of cooking oil matter; eleven missing sweets do not. Chase the top three and let the rest aggregate into a shrinkage figure you watch over time.

  5. 5

    Step 5: Correct the record to the count, and note why

    After investigating, make the system match reality and write the reason next to the adjustment. The reasons, accumulated over a quarter, are the actual report. "Adjusted: 14 units" tells you nothing; "adjusted: 14 units, expired" tells you to order less.

  6. 6

    Step 6: Keep the rota even when nothing is wrong

    The temptation after three clean sections is to stop. The rota is cheap insurance and its deterrent value, once staff know any shelf might be counted this week, is larger than anything it finds.

Why stocktakes go wrong

Counting everything at once

A full count is a day of work that produces one data point a year. The same hours spread across a quarter produce a continuous picture and catch problems while they are still small.

Letting the person responsible for a section count it

This is not an accusation; it is that nobody counts their own work neutrally. Rotate who counts which section, and the figures get better without anybody being accused of anything.

Counting with the expected figure visible

Showing the counter what the number should be turns a count into a confirmation. Print the sheet without the expected column, or count on paper and compare afterwards.

Adjusting the record without recording why

An adjustment with no reason destroys the only information the count produced. The quantity is the easy part; the reason is the part worth the exercise.

Counting during a delivery

Stock arriving mid-count is the most common source of a phantom gap. Count before the delivery or after it is fully received and booked in, never across it.

A worked example: a general shop in Nakuru

Worked example

A shop with roughly 800 lines splits into 16 sections. Each Tuesday at 10am, one section is counted by whoever is not normally responsible for it. The count takes 25 to 40 minutes.

In week three, the cooking oil and fats section comes up eight units short across three sizes, about KES 4,400 at cost. The gap is recent, because the section was clean eleven weeks earlier, which narrows the question usefully.

The investigation takes twenty minutes. Two units were sold at the smaller size price, which the till receipt showed. Four were a short delivery the shop had signed for without counting. Two are unexplained and go to shrinkage.

Three different fixes come out of one count: a shelf label corrected, a rule that deliveries are counted at the gate before signing, and a KES 1,100 unexplained figure that is small enough to live with and now tracked. An annual count would have produced a single number twelve months later with none of this attached to it.

Business impact

Stock you cannot see is stock you lose: dead capital sitting on slow shelves, empty shelves on your fast movers, and shrinkage no one can explain.

Veira tracks every item in and out with reorder alerts, so you hold the right stock and losses surface early.

Where the expected number comes from

Section counting only works if something is keeping a running expected quantity for you. That is the half of the job a shop cannot do on paper: every sale, every delivery and every adjustment has to move a number, continuously, without anyone remembering to do it.

Veira keeps that running figure as sales and deliveries are recorded, so a count sheet is a list of what should be there and a blank column. The adjustment and its reason are recorded against the item, which is what turns a quarter of counts into the reasons report described in step 5.

The counting itself is still a person with a shelf. No system can tell you what is physically on it, and any that claims to is guessing.

Frequently asked questions

How often should a small shop count stock?
One section a week, cycling through the whole shop each quarter, beats a single annual count in both effort and usefulness. Fast-moving or high-value sections such as cooking oil, airtime or cigarettes are worth counting more often than that.
Do I have to close the shop to do a stocktake?
No, and closing is usually what makes people avoid it. Counting one section at a quiet hour works while the shop trades. The only rule is not to count across a delivery or during a rush.
What is an acceptable level of stock difference?
It depends on what you sell, so the useful comparison is against your own previous quarters rather than against a published figure. A gap that is stable and small is a cost of doing business; a gap that is growing, or concentrated in one section or one shift, is a problem with a cause.
Should I count by value or by quantity?
Count by quantity, investigate by value. Counting in units is the only thing a person on a shelf can do accurately; deciding which gaps to chase is a shilling question, and most of the money sits in a handful of lines.
Who should do the counting?
Not the person normally responsible for that section, and ideally not the same person every time. This is about accuracy rather than suspicion: everyone counts their own area optimistically, including owners.
What do I do with the differences I find?
Rank them by shilling value, investigate the top few, correct the record to the physical count, and write the reason beside each adjustment. The accumulated reasons across a quarter are the report worth reading.
Can I do a stocktake without a system?
You can count on paper, but you cannot compare without a running expected quantity, and keeping that by hand for hundreds of lines is not realistic. Without the comparison a stocktake produces a list rather than information.

A stocktake earns its keep through the gap it reveals, not the list it produces, and a gap is only traceable while it is fresh. Count one section a week, count blind, and write down why you adjusted. See how Veira keeps the expected quantity current so the count has something to be compared against.

Need help, or want to talk it through first? Chat with us on WhatsApp
Terms explained

Keep reading

See all Business guides

Veira for your business

Browse Veira by business type · Who we serve