# How to Raise Prices in a Kenyan Shop | Veira

> When a supplier raises costs, absorbing it quietly destroys margin. How to work out the new price, which lines to move, and how to tell customers.

Canonical: https://veirahq.com/blog/raising-prices-kenya

Raising prices is the decision most shopkeepers put off longest and lose the most money to. When a supplier’s cost goes up, absorbing it feels like protecting the customer, and for a week it is. Over a quarter it is simply running the shop for less, and because the loss is spread across every sale it never announces itself. The two things that make a price rise survivable are getting the arithmetic right, which most people do not, and choosing which lines to move, which most people do not think about at all.

Adding the shilling increase onto your price loses margin. To hold a 20% margin when cost goes from KES 100 to 110, divide the new cost by 0.8: the price must move from 125 to 137.50, not to 135.

- Divide, do not add. New price = new cost / (1 - target margin). Passing a KES 10 cost rise on as KES 10 loses margin.
- Markup is on cost and margin is on price. Using them interchangeably is how shops reprice themselves into trouble a few percent at a time.
- Customers can quote the price of staples and could not price most of your shop. Recover margin where attention is not falling.
- One considered change is noticed once; four small ones are noticed four times and look like drift.

1. The arithmetic almost everyone gets wrong
2. Repricing properly
3. Where repricing goes wrong
4. A worked example: a duka facing a cooking oil increase
5. Knowing the margin before you move the price
6. Frequently asked questions

## The arithmetic almost everyone gets wrong

The common move when a cost rises by KES 10 is to add KES 10 to the selling price. That protects the shilling amount of profit and quietly loses the margin, and on a shop with thin margins that is the difference between covering costs and not.

Work it from the margin you need rather than from the size of the increase. If an item costs KES 100 and you sell at 125, your margin is 20% of the selling price, not 25%. When cost rises to 110, holding 20% means the new price is 110 divided by 0.8, which is KES 137.50. Adding the KES 10 straight onto the price gives 135, and a margin of 18.5%.

This is why the markup-versus-margin distinction is not pedantry. A 25% markup on cost and a 25% margin on price are different numbers, and shops that use them interchangeably reprice themselves into trouble a few percent at a time.

Want to see it running in your own business first?

## Repricing properly

Do this as a deliberate exercise when costs move, not item by item as invoices arrive.

1. 1Step 1: Know your current margin per line, not overallAn overall margin hides the lines that are already underwater. Before changing anything, list your main items with cost, price and the resulting margin. The surprises in that list are usually worth more than the repricing.
2. 2Step 2: Divide, do not addNew price = new cost divided by (1 minus your target margin). Cost 110 at a 20% target is 110 / 0.8 = 137.50. Writing this formula on the wall behind the counter saves more money than any negotiation.
3. 3Step 3: Sort lines into three groupsPrice-visible items that customers know to the shilling, such as staples and sodas. Price-invisible items they could not quote if asked. And items where you are the only nearby stockist. The three groups get different treatment and moving them all equally is the mistake.
4. 4Step 4: Move the invisible lines fully, the visible ones carefullyCustomers notice a bread price and do not notice a shoe-polish price. Recovering more margin on the invisible lines lets you move the visible ones later, smaller, or not at all. This is not deception; it is where attention actually falls.
5. 5Step 5: Change the label the same dayThe worst outcome is a new cost, an old shelf label and a staff member honouring the old price. Decide, print, and change the labels in one pass, and tell whoever is on the counter what moved.

## Where repricing goes wrong

### Absorbing the increase to be kind

It is the most common response and the most expensive. You cannot subsidise a supplier’s price rise out of a thin margin for long, and customers rarely notice that you did.

### Adding the increase to the price instead of dividing

Passing on a KES 10 cost rise as KES 10 on the price leaves you with less margin than before, because the margin is a share of a price that barely moved. The gap is small per item and large per quarter.

### Moving every line by the same percentage

A uniform rise is maximally visible for the amount of margin it recovers. Differentiating by how price-visible the line is recovers the same money with less customer friction.

### Repricing in dribs and drabs

Four small increases across a quarter are noticed four times. One considered change is noticed once, and is easier to explain.

### Not telling staff

Counter staff asked about a price rise they did not know was coming will either apologise for it or quietly give the old price. Both cost you. A one-line heads-up is enough.

## A worked example: a duka facing a cooking oil increase

A duka buys a 2-litre cooking oil at KES 560 and sells at 700, a margin of 20% of the selling price. The distributor raises the cost to KES 616, which is a 10% increase.

The instinctive response is to pass on the KES 56: 700 becomes 756. At a cost of 616, a price of 756 is a margin of 18.5%, not 20%. Holding 20% needs 616 / 0.8 = KES 770. The KES 14 gap per bottle is invisible in any single sale and is roughly KES 4,200 a month on 300 bottles.

The gap widens when the rise is only partly passed on. Suppose the owner feels able to move the price to 740, because cooking oil is a price-visible staple. The margin at 616 cost and 740 price is 16.8% rather than 20%, which is KES 30 a bottle short of the 770 the target needed, or about KES 9,000 a month on 300 bottles.

The practical answer is step 3. Oil moves to 740 and takes the margin hit, because customers do know its price. Shoe polish, batteries and matches, which nobody could quote, move to full target margin and recover most of the difference. Total margin holds; the one price customers check moved least.

Running a shop on memory and paper leaves money on the table: missed sales, stock you cannot account for, and receipts KRA will not accept.

Veira records every sale, tracks stock and keeps you eTIMS-compliant automatically, so the numbers look after themselves.

## Knowing the margin before you move the price

Step 1 is the blocker for most shops: you cannot reprice to a target margin if you do not know the current one per line. Veira holds cost and selling price against each product, so the margin is a column rather than an evening with a calculator.

When prices do change, recording the change means later reports compare like with like, which is how you find out a month afterwards whether the rise cost you volume. Without that, the only evidence is an impression.

The judgement in step 3 is yours and stays yours. Which of your lines customers can quote from memory is knowledge about your street, and no system has it.

## Frequently asked questions

A price rise handled badly costs customers; a price rise avoided costs margin on every sale until something gives. Work from the margin you need, divide rather than add, and move the lines nobody can quote before the ones everybody can. [See how Veira tracks cost and margin per product](https://veirahq.com/how-it-works) if step one is where you get stuck.

## Keep reading

[See all Business guides](https://veirahq.com/blog/business)

## Veira for your business

On the Veira side of this: [what Veira costs, by plan](https://veirahq.com/pricing).

[Browse Veira by business type](https://veirahq.com/solutions) · [Who we serve](https://veirahq.com/industries)

Veira files a compliant invoice on every sale and keeps selling when the line drops.
